Clear brackets are made of:

If the patient was just bonded last month and is a Class I case with mild crowding, which wire was most likely used as the initial archwire?

The patient’s upper anterior teeth are overlapping the lower teeth by 60%. This is an example of a

Patient has a large open bite and is 7 years old, what is the most likely factor for his condition?

The main purpose of orthodontic photos is

The bracket is welded on the ______ side of the band

It is important to prophy the tooth before bonding to avoid:

Pressing the adhesive filled bracket onto tooth achieves full _____________.

What type of force begins very high but declines to zero?

Universal orthodontic charting is called

Damon brackets do not require:

The ___________________ appliance aids correction of a deep bite.

The face bow is used:

___________ refers to the chewing surface of the teeth.

Digital scanners work by capturing _____________ laser points per second.

Which instrument is used for removing a fit band?

The _____________ has a tongue crib for tongue control during bonding process.

The LL7 is placed ___mm from incisal edge

Which charting represents the lower left canine?

Which orthodontic influence came up with the classifications?

If a closed coil is not active between two teeth, it is most likely there for the purpose of

Which biocryl thickness is used most commonly when fabricating an essix retainer?

UL6 buccal rests inside of LL6 occlusal surface. What best describes this bite?

Health related reason(s) to correct malocclusion are:

Chemical cement is not light sensitive

Bands that were fit but not cemented can be wiped with disinfectant and put back in the band box.

The etch used to etch a porcelain crown is

The correct measurement for bracket placement of the lower incisors are ____mm

The horizontal line used when charting is called the

Heavy continuous force ___________________ blood supply.

Kobyoshi hooks are used

Another word for archwire material is:

Class II Division I is defined as:

How frequently should the patient wear headgear?

Material that usually takes a few hours to fully harden is called

Ideal overjet is:

What does etching the tooth achieve?

The original curing light was a

The doctor asks the assistant to set up for a wire adjustment to implement force on a specific tooth. Which instrument can be used to add an adjustment bend to an archwire?

_________________ is described as the process of movement of teeth as a result of force to the crown and root.

The mesial cusp of the upper first molar rests in the lower first molars deepest curvature

The arch wire belongs in the:

Overjet is measured in

The impression material used in conjunction with impression trays is called:

The type of band cement that requires a glass slab is called ______________________.

Separators are used to

After successfully etching, the tooth should appear visibly ______________

Preparation for bonding to a porcelain crown includes:

Which bracket slot size has the greatest torque control?

The mesial cusp of the upper first molar rests between the lower 1^st & 2^nd molars

Becky is 10 years old with a mixed dentition and according to her panoramic x-ray, she has severe crowding and an impacted canine. Becky is a good candidate for:

Which wire has the most rigidity?

What characteristic differentiates the first and second bicuspids?

A panoramic x-ray is used to

Which statement is most true?

Headgear tubes are used for:

An inclination at the gingival third towards the mesial would indicate:

__________ happens when the roots of the teeth tip lingual, usually causing overjet.

The distal cusp of the upper first molar rests in the lower first molars deepest curvature.

What is the maximum amount of time separators should be left in the patient’s mouth?

The doctor has placed an adjustment to extrude the UR2. The wire was accidentally flipped, and the wire was inserted. What is the result of this error?

Normal maxilla/mandible relationship with mild crowding is classified as:

Which marking represents mandibular left canine and maxillary right 2nd bi-cuspid?

Which marking represents the maxillary left central?

Which charting represents the maxillary third molars?

A bend causing a twist in the structure and causes root tipping when coupled with a bracket slot is referred to as:

What are the three things that are included in a bracket prescription?

Applying force towards the incisal edge causes ___________________.

An 8-year-old girl has a -4mm overjet. What appliance would be used to correct this issue?

List the steps of bonding:

To etch a standard adult tooth, which etch would the assistant choose to use?

What are the most common bracket slots?

As the OA, what next step should you take to repair a bracket that has failed?

A twist wire offers: